0
Categories
SIIG CE-RC0111-S1 Infrared Extender - Wireless IR Signal Extender Kit For A/V Equipment Extend the IR signal up to 656ft (200m) TX to RX IR over Wireless Signal Extender Kit Pairing Button IR Sensor 2x USB Power Cable 3.5mm IR jack Aluminum Housing
SIIG CE-RC0111-S1 Infrared Extender - Wireless IR Signal Extender Kit For A/V Equipment Extend the IR signal up to 656ft (200m) TX to RX IR over Wireless Signal Extender Kit Pairing Button IR Sensor 2x USB Power Cable 3.5mm IR jack Aluminum Housing SIIG CE-RC0111-S1 Infrared Extender - Wireless IR Signal Extender Kit For A/V Equipment Extend the IR signal up to 656ft (200m) TX to RX IR over Wireless Signal Extender Kit Pairing Button IR Sensor 2x USB Power Cable 3.5mm IR jack Aluminum Housing SIIG CE-RC0111-S1 Infrared Extender - Wireless IR Signal Extender Kit For A/V Equipment Extend the IR signal up to 656ft (200m) TX to RX IR over Wireless Signal Extender Kit Pairing Button IR Sensor 2x USB Power Cable 3.5mm IR jack Aluminum Housing

SIIG CE-RC0111-S1 Infrared Extender - Wireless IR Signal Extender Kit For A/V Equipment Extend the IR signal up to 656ft (200m) TX to RX IR over Wireless Signal Extender Kit Pairing Button IR Sensor 2x USB Power Cable 3.5mm IR jack Aluminum Housing

Extends IR signals allows remote control of your device from long distance

  • Wide coverage wireless signals penetrate walls and other obstructions allow you to move around freely and still have IR control of your A/V or other IR enabled equipment from remote locations up to 656ft (200m) away. Note: The wireless operating distance will vary depending on your building layout, surrounding obstructions, and electronic interference and may be less than the maximum distance
  • Compatible with IR remote controls using frequency range between 20KHz - 60KHz
  • High performance IR electronics provide real time signal transmission, virtually without delay, built-in LED indicator illuminates when the IR signal is received for easy status recognition
  • Portable size with included IR Blaster and IR Receiver extension cables allows easy and flexible placement anywhere in a home or office environment
  • Premium quality metal housing enhances heat dissipation and durability for dependable performance and long life
Manufacturer: SIIG SUPPORT
MPN: CE-RC0111-S1
Availability: Low Stock
Condition: New
CA Proposition 65: None
$41.26
Add to Wishlist

Product Description

Physical Characteristics
  • Product Material:
    Aluminum
Miscellaneous
  • Application/Usage:
    A/V Equipment
  • Country of Origin:
    China
  • Environmentally Friendly:
    Yes
  • Environmental Compliance:
    Restriction of Hazardous Substances (RoHS)

Wireless transmission distance:
up to 656ft (200m), line-of-sight
Wireless frequency:
915MHz
Power gain:
10dBm
IR frequency:
20KHz - 60KHz
Housing:
Aluminum
Transmitter unit (TX)
- Connector:
1x, 3.5mm, IR Jack, Receiver
1x, DC Jack, USB power input
1x, IR Receiver sensor
1x, IR LED indicator
1x, Click button, lock ID
Receiver unit (RX):
- Connector:
1x 3.5mm, IR Jack, Emitter
1x DC Jack, USB power input
1x IR Emitter sensor
1x IR LED indicator
1x Click button, lock ID
USB Power cable:
Input: 4-Pin, USB Type-A, Power input
Output: DC 5V output
Power consumption: 300mW
Environmental conditions:
Operating temperature: 32 to 104 degrees F
Storage temperature: -4 to 140 degrees F
Relative humidity: 10 to 90% RH (non-condensing)
Certifications/Standards:
FCC, RoHS
Item Dimension (L inchxW inchxH inch)
4 x 6 x 4
Weight
1.00lb
Warranty Information
2 years