Tripp Lite series SMART1000RM1UN Line-interactive UPS - Tripp Lite by Eaton UPS SmartPro 120V 1kVA 800W Line Interactive Sine Wave UPS 1U Rack/Vertical WEBCARDLX Network Interface USB DB9 6 Outlets 1000 VA/800 W 120 V AC 4 Minute Stand by Time 1U Rack

Protects Mission-Critical Rack-Mounted Equipment

Provides fully regulated sine wave AC output for servers, network storage devices and telecom hardware
Audible alarm signals loss of utility power, overload and low battery
6 NEMA 5-15R outlets
10-ft. (3.05 m) power cord with 120V NEMA 5-15P input
450-joule surge suppression rating

Reliable Battery Backup

Supports half load up to 14 min. and full load up to 4 min.
Internal batteries designed for hot-swap field replacement

Pre-Installed WEBCARDLX Network Interface

Allows full remote access for power monitoring, configuration, control and email notifications via secure web browser, SNMP, Telnet, SSH, and CLI.
Optional E2 sensors (sold separately) enable site monitoring of temperature, humidity and contact-closure status

Reduce Service Calls with Auto Probe Autonomous Device Management

Auto Probe feature (Firmware 15.5.2 and greater) of the LX Platform Interface checks the connectivity status of any networked device and automatically takes one or more user-configured actions if the device fails to respond; actions include outlet reboot, set SNMP traps, SNMP OID sets, and even script execution when used in conjunction with the Tripp Lite PowerAlert Network Shutdown Agent (PANSA)

Switchable Outlets

2 load banks, each with one outlet controllable remotely to reboot equipment or shed nonessential loads

Automatic Voltage Regulation (AVR)

Maintains 120V nominal output over input range of 83V-147V without using battery power

EMI/RFI Line Noise Filtering

Removes electromagnetic and radio frequency interference that can disrupt or damage equipment's performance

LED Indicators

Front-panel LEDs signal power, voltage correction, load level and battery charge state

Communications Ports

USB and DB9 ports enable data-saving unattended shutdown when used with Tripp Lite's PowerAlert software (available via free download at www.tripplite.com/poweralert)
EPO port supports emergency shutdown in large facilities

Versatile Installation Options

Hardware included for mounting in 1U of EIA-standard 19 in. 2- or 4-post rack
Optional 4POSTRAILKIT1U accessory available for extra support in 4-post installations
Compatible with vertical mount cabinets

Product Description

Technical Information

Receptacle Type:
NEMA 5-15R
Receptacle Detail:
6 x NEMA 5-15R

Power Description

Load Capacity (VA):
1000 VA
Load Capacity (Watt):
800 W
Input Voltage:
120 V AC
Output Voltage:
120 V AC

Battery Information

Backup/Run Time (Full Load):
4 Minute

Physical Characteristics

Height:
1.70"
Width:
17.50"
Depth:
16.80"
Rack Height:
1U
Form Factor:
Rack-mountable
Weight (Approximate):
32 lb

Miscellaneous

Country of Origin:
Taiwan
TAA Compliant:
Yes
Environmentally Friendly:
Yes
Environmental Compliance:
Restriction of Hazardous Substances (RoHS)

OUTPUT
Output Volt Amp Capacity (VA): 1000
Output kVA Capacity (kVA): 1
Output Watt Capacity (Watts): 800
Power Factor: 0.8
Nominal Output Voltage(s) Supported: 110V, 115V, 120V
Nominal Voltage Details: 120v nominal output in battery mode
Frequency Compatibility: 60 Hz
Output Voltage Regulation (Line Mode): -21%, +8%
Output Voltage Regulation (Battery Mode): +/- 5%
Output Receptacles: (6) 5-15R
Load Management Receptacles: Two switchable single-outlet 5-15R load banks
Output AC Waveform (AC Mode): Sine wave
Output AC Waveform (Battery Mode): Pure Sine wave
INPUT
Rated input current (Maximum Load): 9.2A
Nominal Input Voltage(s) Supported: 120V AC
UPS Input Connection Type: 5-15P
Input Circuit Breakers: 15A
Recommended Electrical Service: 15A 120V
Input Cord Length (m): 3.05
Input Phase: Single-Phase
BATTERY
Full Load Runtime (min.): 4 min. (800w)
Half Load Runtime (min.): 14 min. (400w)
DC System Voltage (VDC): 24
Battery Recharge Rate (Included Batteries): Less than 4 hours from 10% to 90% (typical, full load discharge)
Internal UPS Replacement Battery Cartridge: RBC69-1U
Battery Access: Front panel battery access door
Battery Replacement Description: Hot-swappable, user replaceable batteries
Expandable Runtime: No
VOLTAGE REGULATION
Voltage Regulation Description: Automatic voltage regulation (AVR) maintains line power operation with an input voltage range of 83 to 147
Overvoltage Correction: Input voltages between 128 and 147 are reduced by 12%
Undervoltage Correction: Input voltages between 83 and 107 are boosted by 14%
USER INTERFACE, ALERTS and CONTROLS
Switches: 2 Switches control off/on power status and alarm-cancel/self-test operation
Alarm Cancel Operation: Power-fail alarm can be silenced using alarm-cancel switch once silenced, alarm will re-sound to indicate low-battery status
Audible Alarm: Audible alarm indicates power-failure, overload and low-battery conditions
LED Indicators: 5 LEDs indicate line power, battery power, overload, voltage regulation and battery low/replace status
SURGE / NOISE SUPPRESSION
UPS AC Suppression Joule Rating: 450
EMI / RFI AC Noise Suppression: Yes
AC Suppression Response Time: Instantaneous
PHYSICAL
Included Mounting Accessory Description: Included mounting brackets support 2 and 4 post rackmount installation Optional 4POSTRAILKIT1U is available for additional support in 4 post rackmount applications
Primary Form Factor: Rackmount
Rack Height (U Spaces): 1
Cooling Method: Fan
UPS Housing Material: Steel
ENVIRONMENTAL
Operating Temperature Range: +32 to +104 degrees Fahrenheit / 0 to +40 degrees Celsius
Storage Temperature Range: +5 to +122 degrees Fahrenheit / -15 to +50 degrees Celsius
Relative Humidity: 0 to 95%, non-condensing
AC Mode BTU / Hr. (Full Load): 39
Battery Mode BTU / Hr. (Full Load): 816
AC Mode Efficiency Rating (100% Load): 99%
COMMUNICATIONS
Communications Interface: DB9 Serial, EPO (emergency power off), Pre-installed network card, Slot for SNMP/Web interface, USB
Network Monitoring Port Description: Includes pre-installed WEBCARDLX Network Management Card
PowerAlert Software: For local monitoring via the UPSs built-in communication ports, download
Communications Cable: USB and DB9 cabling included
WatchDog Compatibility: Supports Watchdog application, OS and hard-reboot restart options for remote applications
LINE / BATTERY TRANSFER
Transfer Time: 5 milliseconds AC to DC, 1 millisecond DC to AC
Low Voltage Transfer to Battery Power (Setpoint): 83
High Voltage Transfer to Battery Power (Setpoint): 147
SPECIAL FEATURES
Grounding Lug Back: panel grounding lug
Cold Start (Startup in Battery Mode During a Power Failure): Cold-start operation supported
High Availability UPS Features: Hot swappable batteries
Green Energy-Saving Features: Greater than 95% efficiency - GREEN UPS Individually controllable load banks
CERTIFICATIONS
UPS Certifications: Meets FCC Part 15 Category A (EMI),Tested to CSA (Canada), Tested to NOM (Mexico), Tested to UL1778 (USA)
Package Includes
SMART1000RM1UN SmartPro 120V 1kVA 800W Line-Interactive Sine Wave UPS
Pre-installed WEBCARDLX network interface
USB cable
DB9 cable
EPO cable
Mounting hardware
Owners manual
Item Dimension ( L inch x W inch x H inch)
23 x 24 x 7
Weight
36.00 lb
Warranty Information
2-year warranty