Tripp Lite series SMART1500RM2UL Line-interactive UPS - Tripp Lite by Eaton UPS SmartPro UPS Lithium Battery Backup 120V 1500VA / 1440W Line Interactive 2U Sine Wave LCD 1500 VA/1440 W 110 V AC, 115 V AC, 120 V AC 7.10 Minute Stand by Time 2U Rack mo

Protects Rack-Mounted EquipmentThis UPS provides fully regulated sine wave AC output for servers, telecom hardware and other applications where long battery lifespan is critical. Plug your equipment into the eight NEMA 5-15R outlets. Two outlets are switchable, allowing you to power connected equipment on and off remotely to reset or reboot connected equipment or to shed less significant loads to extend battery runtime for more critical equipment. All outlets are protected by 570-joule network-grade surge protection to fight off damaging power surges and spikes.

Superior LiFePO4 Battery Backup Compared to Lead Acid BatteryWith more than double the service life, three times more charge/discharge cycles and 60% the weight of comparable lead-acid batteries, the LiFePO4 battery features 120 volt battery backup and recharges to 100% capacity in less than two hours.

Automatic Voltage Regulation (AVR) Conserves Battery PowerAVR maintains 120V nominal output over input range of 83V-145V without using battery power.

EMI/RFI Line Noise Filtering Keeps Equipment Performing in Top FormNoise filtering removes electromagnetic and radio frequency interference that can disrupt equipment performance.

Multi-Function LCD and Audible Alarms Keep You InformedThe front-panel LCD information and configuration screen displays detailed UPS and site power status and operating data, as well as input and output voltage, operating mode, alarm function and additional options. An alarm sounds to warn you of power failure, low battery, overload, UPS fault and remote shutdown conditions. The LCD screen rotates for easy viewing in rack-mount or tower configurations.

Optional Network Management CardsThe SMART1500RM2UL is compatible with Tripp Lite UPS management cards, such as WEBCARDLX, for detailed monitoring of UPS and site power conditions.

Communications PortsUSB and DB9 ports enable unattended shutdown when used with Tripp Lite PowerAlert software (available free at www.tripplite.com/poweralert). EPO port supports emergency shutdown in large facilities.

Versatile Installation OptionsThe SMART1500RM2UL includes hardware for 4-post mounting in 2U of EIA-standard 19-inch rack. This UPS mounts on a wall, 2-post rack or in an upright tower position.

High Efficiency OperationOperating with a high 97% line-mode efficiency, this 1.5kVA UPS system saves BTU heat output and energy costs

Ultimate Lifetime Insurance and 5-Year WarrantyThis UPS system is backed by Tripp Lite's $250,000 Ultimate Lifetime Insurance, which covers any connected components (U.S., Canada and Puerto Rico only). It also has a 5-year limited warranty.

Product Description

Technical Information

Plug/Connector Type:
NEMA 5-15P
Receptacle Type:
NEMA 5-15R, NEMA 5-15/20R
Receptacle Detail:
4 x NEMA 5-15R, 4 x NEMA 5-15/20R
Transfer Time:
5 ms
Phase:
Single Phase
Application/Usage:
Server, Telecommunication, POS Terminal, VoIP Device, Network Storage Device

Power Description

Load Capacity (VA):
1500 VA
Load Capacity (Watt):
1440 W
Input Voltage:
120 V AC
Output Voltage:
110 V AC, 115 V AC, 120 V AC
Waveform Type:
Pure Sine Wave

Battery Information

Backup/Run Time (Full Load):
7.10 Minute
Hot Swappable:
Yes
Typical Battery Recharge Time:
1.40 Hour

Physical Characteristics

Height:
3.43"
Width:
17.32"
Depth:
19.46"
Rack Height:
2U
Form Factor:
Rack-mountable
Weight (Approximate):
41.78 lb

Miscellaneous

Country of Origin:
China
Environmentally Friendly:
Yes
Environmental Compliance:
Restriction of Hazardous Substances (RoHS)

UPS Type
Line-Interactive
INPUT
Input Phase
Single-Phase
Rated input current (Maximum Load)
12A (120V)
Nominal Input Voltage(s) Supported
120V AC
UPS Input Connection Type
5-15P
UPS Input Cord Length (ft.)
10
UPS Input Cord Length (m)
3.1
Recommended Electrical Service
15A 120V
OUTPUT
Output Capacity (VA)
1500
Output Capacity (kVA)
1.5
Output Capacity (Watts)
1440
Output Capacity (kW)
1.44
Power Factor
0.96
Nominal Voltage Details
120v nominal output in battery mode
Frequency Compatibility
60 Hz
Output Voltage Regulation (Line Mode)
-14%, +6%
Output Voltage Regulation (Battery Mode)
+/- 5%
Load Management Receptacles
Two switchable single-outlet load banks
Output AC Waveform (AC Mode)
Pure Sine wave
Output AC Waveform (Battery Mode)
Pure Sine wave
Nominal Output Voltage(s) Supported
110V, 115V, 120V
Output Receptacles
(8) 5-15R
Individually Controllable Load Banks
Yes
BATTERY
Battery Type
Lithium Ion
Runtime Full Load (min.)
7.1 min. (1440W)
Runtime Half Load (min.)
15.4 min. (720W)
DC System Voltage (VDC)
48
Battery Recharge Rate (Included Batteries)
1.4 hours from 10% to 90% (typical, full load discharge)
VOLTAGE REGULATION
Voltage Regulation Description
Automatic voltage regulation (AVR) maintains line power operation with an input voltage range of 83 to 145
Overvoltage Correction
Input voltages between 127 and 145 are reduced by 12%
Undervoltage Correction
Input voltages between 108 and 96 are boosted by 12%
Severe Undervoltage Correction
Input voltages between 83 and 95 are boosted by 24%
USER INTERFACE, ALERTS and CONTROLS
Front Panel LCD Display
Front panel LCD information and configuration screen offers detailed UPS and site power status and operating data, plus configuration of voltage, operating mode, alarm function and a variety of additional options (see manual for detailed LCD configuration and monitoring options)
Switches
3 pushbutton switches control OFF / ON power status, MODE selection and MUTE / ENTER control functions
Alarm Cancel Operation
Power-fail alarm can be temporarily silenced using alarm-cancel switch, silent mode alarm configuration option available
Audible Alarm
Audible alarm indicates UPS startup, power-failure, low-battery, overload, UPS fault and remote shutdown conditions
SURGE / NOISE SUPPRESSION
UPS AC Suppression Joule Rating
570
UPS AC Suppression Response Time
Instantaneous
EMI / RFI AC Noise Suppression
Yes
PHYSICAL
Primary Form Factor
Rackmount
Rack Height
2U
Cooling Method
Fan
Included Mounting Accessory Description
Included 4POSTRAILKIT mounting bracket enables installation in 4 post racks from 20.5 to 36 inches (521 to 914mm)
Installation Form Factors Supported with Included Accessories
4 post 19 inch rackmount
Installation Form Factors Supported with Optional Accessories
2 post rackmount ( 2POSTRMKITWM ), 2-4 post front rail rackmount ( UPSHDEARKIT ), 4 post rackmount short-depth ( 4POSTRAILKITWM ), Tower ( 2-9USTAND ), Wallmount ( 2POSTRMKITWM )
Minimum Required Rack Depth (cm)
58.42
Optional Mounting Accessory Notes
Optional 2-9USTAND enables upright tower UPS placement, 2POSTRMKITWM enables wall-mount and 2-post rackmount installation, 4POSTRAILKITWM enables installation in 4-post short-depth racks from 14.5 to 23.5 inches (368 to 597mm), UPSHDEARKIT enables installation in 2 or 4-post racks using front vertical rails only, without rear support
UPS Housing Material
Steel
ENVIRONMENTAL
Operating Temperature Range
32^o to 104^oF (0^o to 40^oC)
Storage Temperature Range
5^o to 122^oF (-15^o to 50^oC)
Relative Humidity
0 to 95%, non-condensing
AC Mode BTU / Hr. (Full Load)
130
AC Mode Efficiency Rating (100% Load)
97%
Audible Noise
50.4 dBA maximum, front side 1m
COMMUNICATIONS
Network Management Cards
WEBCARDLXE , RELAYIOCARD
Network Monitoring Port Description
Supports detailed monitoring of UPS and site power conditions
Communications Cable
USB, DB9 and EPO cabling included
WatchDog Compatibility
Supports Watchdog application, OS and hard-reboot restart options for remote applications
Network UPS Tools (NUT) Compatibility
NUT compatible. See a full list of NUT compatible Tripp Lite UPS systems
Network Management Card Description
Network management card optional
Communications Interface
DB9 Serial, EPO (emergency power off), Slot for SNMP/Web interface, USB (HID enabled)
LINE / BATTERY TRANSFER
Transfer Time
5 milliseconds (AC to battery mode), 1 millisecond (Battery to AC mode)
Low Voltage Transfer to Battery Power (Setpoint)
83
High Voltage Transfer to Battery Power (Setpoint)
145
FEATURES and SPECIFICATIONS
Cold Start (Startup in Battery Mode During a Power Failure)
Cold-start operation supported
High Availability UPS Features
Auto Probe Monitoring and Reboot (requires WEBCARDLX), Automatic Voltage Regulation (AVR), Remote management, Surge/noise protection
Green Energy-Saving Features
Greater than 95% efficiency - GREEN UPS, Individually controllable load banks
Grounding Details
Back panel grounding lug
APPLICATIONS
UPS Applications
Large Network, High-End Desktop/Small Network
STANDARDS and COMPLIANCE
Product Certifications
CSA (Canada), NOM (Mexico), UL 1778
Product Compliance
RoHS, FCC Part 15 Class A (USA)
Item Dimension (L inchxW inchxH inch)
28 x 26 x 11

Weight
61.10 lb

Warranty Information
5-year limited warranty