Tripp Lite series SMART2200RM2UL Line-interactive UPS - Tripp Lite by Eaton UPS SmartPro 120V 2.2kVA 1.92kW Line Interactive Sine Wave UPS Lithium Iron Phosphate (LiFePO4) Batteries 2U LCD USB DB9 2200 VA/1920 W 110 V AC, 115 V AC, 120 V AC 5.10 Minute

• Plug/Connector Type:
  NEMA 5-20P
  
• Receptacle Type:
  NEMA 5-15/20R, NEMA 5-20
  
• Receptacle Detail:
  4 x NEMA 5-15/20R, 4 x NEMA 5-20
  
• Transfer Time:
  5 ms
  
• EMI/RFI Noise Filter:
  Yes
  
• Phase:
  Single Phase
  
• Application/Usage:
  Server, Network Storage Device
  

• Load Capacity (VA):
  2200 VA
  
• Load Capacity (Watt):
  1920 W
  
• Input Voltage:
  120 V AC
  
• Input Current:
  16 A
  
• Output Voltage:
  110 V AC, 115 V AC, 120 V AC
  
• Waveform Type:
  Pure Sine Wave
  
• Surge Energy Rating:
  570 J
  
• Circuit Breaker:
  Yes
  

• Alarm:
  UPS StartUp, Power Failure, Low Battery, Overload, UPS Fault, Remote Shutdown
  

• Serial Port:
  Yes
  
• USB:
  Yes
  

• Backup/Run Time (Full Load):
  5.10 Minute
  
• Backup/Run Time (Half Load):
  11.70 Minute
  
• Hot Swappable:
  Yes
  
• Typical Battery Recharge Time:
  1.40 Hour
  

• Maximum Operating Temperature:
  122°F (50°C)
  
• Sound Emission (A-Weighted):
  45 dB(A)
  
• Thermal Dissipation:
  393.59 W
  

• Height:
  3.43"
  
• Width:
  19.45"
  
• Depth:
  17.32"
  
• Rack Height:
  2U
  
• Form Factor:
  Rack-mountable
  
• Weight (Approximate):
  41.78 lb
  

• Country of Origin:
  China
  
• Environmentally Friendly:
  Yes
  
• Environmental Compliance:
  Restriction of Hazardous Substances (RoHS)
  

UPS Type
Line-Interactive
INPUT
Input Phase
Single-Phase
Rated input current (Maximum Load)
16A (120V)
Nominal Input Voltage(s) Supported
120V AC
UPS Input Connection Type
5-20P
UPS Input Cord Length (ft.)
10
UPS Input Cord Length (m)
3.1
Recommended Electrical Service
20A 120V
OUTPUT
Output Capacity (VA)
2200
Output Capacity (kVA)
2.2
Output Capacity (Watts)
1920
Output Capacity (kW)
1.92
Power Factor
0.87
Nominal Voltage Details
120v nominal output in battery mode
Frequency Compatibility
60 Hz
Output Voltage Regulation (Line Mode)
-14%, +6%
Output Voltage Regulation (Battery Mode)
+/- 5%
Load Management Receptacles
Two switchable single-outlet load banks
Output AC Waveform (AC Mode)
Pure Sine wave
Output AC Waveform (Battery Mode)
Pure Sine wave
Nominal Output Voltage(s) Supported
110V, 115V, 120V
Output Receptacles
(4) 5-15R, (4) 5-15/20R
Individually Controllable Load Banks
Yes
BATTERY
Battery Type
Lithium Ion
Runtime Full Load (min.)
5.1 min. (1920W)
Runtime Half Load (min.)
11.7 min. (960W)
DC System Voltage (VDC)
48
Battery Recharge Rate (Included Batteries)
1.4 hours from 10% to 90% (typical, full load discharge)
VOLTAGE REGULATION
Voltage Regulation Description
Automatic voltage regulation (AVR) maintains line power operation with an input voltage range of 83 to 145
Overvoltage Correction
Input voltages between 127 and 145 are reduced by 12%
Undervoltage Correction
Input voltages between 108 and 96 are boosted by 12%
Severe Undervoltage Correction
Input voltages between 83 and 95 are boosted by 24%
USER INTERFACE, ALERTS and CONTROLS
Front Panel LCD Display
Front panel LCD information and configuration screen offers detailed UPS and site power status and operating data, plus configuration of voltage, operating mode, alarm function and a variety of additional options (see manual for detailed LCD configuration and monitoring options)
Switches
3 pushbutton switches control OFF / ON power status, MODE selection and MUTE / ENTER control functions
Alarm Cancel Operation
Power-fail alarm can be temporarily silenced using alarm-cancel switch, silent mode alarm configuration option available
Audible Alarm
Audible alarm indicates UPS startup, power-failure, low-battery, overload, UPS fault and remote shutdown conditions
SURGE / NOISE SUPPRESSION
UPS AC Suppression Joule Rating
570
UPS AC Suppression Response Time
Instantaneous
EMI / RFI AC Noise Suppression
Yes
PHYSICAL
Primary Form Factor
Rackmount
Rack Height
2U
Cooling Method
Fan
Included Mounting Accessory Description
Included 4POSTRAILKIT mounting bracket enables installation in 4 post racks from 20.5 to 36 inches (521 to 914mm)
Installation Form Factors Supported with Included Accessories
4 post 19 inch rackmount
Installation Form Factors Supported with Optional Accessories
2 post rackmount ( 2POSTRMKITWM ), 2-4 post front rail rackmount ( UPSHDEARKIT ), 4 post rackmount short-depth ( 4POSTRAILKITWM ), Tower ( 2-9USTAND ), Wallmount ( 2POSTRMKITWM )
Minimum Required Rack Depth (cm)
63.5
Optional Mounting Accessory Notes
Optional 2-9USTAND enables upright tower UPS placement, 2POSTRMKITWM enables wall-mount and 2-post rackmount installation, 4POSTRAILKITWM enables installation in 4-post short-depth racks from 14.5 to 23.5 inches (368 to 597mm), UPSHDEARKIT enables installation in 2 or 4-post racks using front vertical rails only, without rear support
ENVIRONMENTAL
Operating Temperature Range
32^o to 104^oF (0^o to 40^oC)
Storage Temperature Range
5^o to 122^oF (-15^o to 50^oC)
Relative Humidity
0 to 95%, non-condensing
AC Mode BTU / Hr. (Full Load)
221
AC Mode Efficiency Rating (100% Load)
97%
Battery Mode Heat Dissipation (BTU/Hr) at Full Load
1343
Audible Noise
42.2 dBA typical / 50.6 dBA maximum, front side 1m
COMMUNICATIONS
Network Management Cards
WEBCARDLXE , RELAYIOCARD
Network Monitoring Port Description
Supports detailed monitoring of UPS and site power conditions
Communications Cable
USB, DB9 and EPO cabling included
WatchDog Compatibility
Supports Watchdog application, OS and hard-reboot restart options for remote applications
Network UPS Tools (NUT) Compatibility
NUT compatible. See a full list of NUT compatible Tripp Lite UPS systems at https://networkupstools.org/stable-hcl.htmlmanufacturerTripp%20Lite
Network Management Card Description
Network management card optional
Communications Interface
DB9 Serial, EPO (emergency power off), Slot for SNMP/Web interface, USB (HID enabled)
LINE / BATTERY TRANSFER
Transfer Time
5 milliseconds (AC to battery mode), 1 millisecond (Battery to AC mode)
Low Voltage Transfer to Battery Power (Setpoint)
83
High Voltage Transfer to Battery Power (Setpoint)
145
FEATURES and SPECIFICATIONS
Cold Start (Startup in Battery Mode During a Power Failure)
Cold-start operation supported
High Availability UPS Features
Auto Probe Monitoring and Reboot (requires WEBCARDLX), Automatic Voltage Regulation (AVR), Remote management, Surge/noise protection
Green Energy-Saving Features
Greater than 95% efficiency - GREEN UPS, Individually controllable load banks
Grounding Details
Back panel grounding lug
APPLICATIONS
UPS Applications
Large Network
STANDARDS and COMPLIANCE
Product Certifications
CSA (Canada), NOM (Mexico), UL 1778
Product Compliance
RoHS, FCC Part 15 Class A (USA)
Item Dimension (L inchxW inchxH inch)
28 x 26 x 11

Weight
61.10 lb

Warranty Information
5-year limited warranty