Tripp Lite series SMART750RM1UN Line-interactive UPS - Tripp Lite by Eaton UPS SmartPro 120V 750VA 600W Line Interactive Sine Wave UPS 1U Rack/Vertical Pre installed WEBCARDLX Network Interface USB DB9 Serial 750 VA/600 W 120 V AC 4.90 Minute Stand by

Tripp Lite SMART750RM1U 750VA /.75kVA / 600 watt line interactive, sine wave UPS system offers complete power protection for critical network applications in a highly efficient 1U total rack/tower configuration. Network management interfaces support communications via USB port, DB9 serial port and pre-installed WEBCARDLX network management interface card. The Java-free HTML5-based WEBCARDLX interface enables full remote access for site power and UPS status monitoring, configuration, control and email notifications via secure web browser, SNMP, telnet or SSH. It supports 10/100 Mbps auto-sensing for optimum communication with an Ethernet network. Optional EnviroSense2 modules (sold separately) provide a variety of environmental monitoring capabilities. Protocols supported include HTTP, HTTPS, SMTP, SNMPv1, SNMPv2, SNMPv3, telnet, SSH, FTP, DHCP and NTP. Line interactive voltage regulation, network-grade surge suppression and long-lasting sine wave AC output during blackouts make this UPS ideal for advanced networking applications in datacenters, computer rooms and network closets.

Product Description

Technical Information

Receptacle Type:
NEMA 5-15R
Receptacle Detail:
6 x NEMA 5-15R

Power Description

Load Capacity (VA):
750 VA
Load Capacity (Watt):
600 W
Input Voltage:
120 V AC
Output Voltage:
120 V AC

Battery Information

Backup/Run Time (Full Load):
4.90 Minute
Typical Battery Recharge Time:
13.20 Minute

Physical Characteristics

Height:
1.70"
Width:
17.50"
Depth:
16.80"
Rack Height:
1U
Form Factor:
Rack-mountable
Weight (Approximate):
30 lb

Miscellaneous

Country of Origin:
Taiwan
Environmentally Friendly:
Yes
Environmental Compliance:
Restriction of Hazardous Substances (RoHS)

OUTPUT
Output Volt Amp Capacity (VA): 750
Output Watt Capacity (Watts): 600
Power Factor: 0.8
Nominal Output Voltage(s) Supported: 110V 115V 120V
Nominal Voltage Details 120v: nominal output in battery mode
Frequency Compatibility: 60 Hz
Output Voltage Regulation (Line Mode): -21%, +8%
Output Voltage Regulation (Battery Mode): +/- 5%
Output Receptacles: (6) 5-15R
Load Management Receptacles: Two switchable single-outlet 5-15R load banks
Output AC Waveform (AC Mode): Sine wave
Output AC Waveform (Battery Mode): Pure Sine wave
INPUT
Rated input current (Maximum Load): 7A
Nominal Input Voltage(s) Supported: 120V AC
UPS Input Connection Type: 5-15P
Input Circuit Breakers: 15A
Recommended Electrical Service: 15A 120V
Input Cord Length (ft.): 10
Input Phase: Single-Phase
BATTERY
Full Load Runtime (min.): 4.9 min. (600w)
Half Load Runtime (min.): 13.2 min. (300w)
DC System Voltage (VDC): 24
Battery Recharge Rate (Included Batteries): Less than 4 hours from 10% to 90% (typical, full load discharge)
Internal UPS Replacement Battery Cartridge: RBC64-1U
Battery Access: Front panel battery access door
Battery Replacement Description: Hot-swappable, user replaceable batteries
Expandable Runtime: No
VOLTAGE REGULATION
Voltage Regulation Description: Automatic voltage regulation (AVR) maintains line power operation with an input voltage range of 83 to 147
Overvoltage Correction: Input voltages between 128 and 147 are reduced by 12%
Undervoltage Correction: Input voltages between 83 and 107 are boosted by 14%
USER INTERFACE, ALERTS AND CONTROLS
Switches: 2 Switches control off/on power status and alarm-cancel/self-test operation
Alarm Cancel Operation: Power-fail alarm can be silenced using alarm-cancel switch once silenced, alarm will re-sound to indicate low-battery status
Audible Alarm: Audible alarm indicates power-failure, overload and low-battery conditions
LED Indicators: 5 LEDs indicate line power, battery power, overload, voltage regulation and battery low/replace status
SURGE / NOISE SUPPRESSION
UPS AC Suppression Joule Rating: 450
UPS AC Suppression Response Time: Instantaneous
EMI / RFI AC Noise Suppression: Yes
PHYSICAL
Included Mounting Accessory Description: Included mounting brackets support 2 and 4 post rackmount installation Optional 4POSTRAILKIT1U is available for additional support in 4 post rackmount applications
Primary Form Factor: Rackmount
Cooling Method: Fan
UPS Housing: Material Steel
ENVIRONMENTAL
Operating Temperature Range: +32 to +104 degrees Fahrenheit / 0 to +40 degrees Celsius
Storage Temperature Range: +5 to +122 degrees Fahrenheit / -15 to +50 degrees Celsius
Relative Humidity: 0 to 95%, non-condensing
AC Mode BTU / Hr. (Full Load): 38
Battery Mode BTU / Hr. (Full Load): 545
AC Mode Efficiency Rating (100% Load): 98%
COMMUNICATIONS
Communications Interface: DB9 Serial EPO (emergency power off) Pre-installed network card Slot for SNMP/Web interface USB
Network Monitoring Port Description: Includes pre-installed WEBCARDLX Network Management Card
PowerAlert Software: For local monitoring via the UPSs built-in communication ports, download PowerAlert Local software at http://www.tripplite.com/poweralert
Communications Cable: USB and DB9 cabling included
WatchDog Compatibility: Supports Watchdog application, OS and hard-reboot restart options for remote applications
LINE / BATTERY TRANSFER
Transfer Time: 5 milliseconds AC to DC 1 millisecond DC to AC
Low Voltage Transfer to Battery Power (Setpoint): 83
High Voltage Transfer to Battery Power (Setpoint): 147
SPECIAL FEATURES
Grounding Lug: Back panel grounding lug
Cold Start (Startup in Battery Mode During a Power Failure): Cold-start operation supported
High Availability UPS Features: Hot swappable batteries
CERTIFICATIONS
UPS Certifications: Tested to UL1778 (USA) Tested to CSA (Canada) Tested to NOM (Mexico) Meets FCC Part 15 Category A (EMI)
Item Dimension (L"xW"xH")
23 x 24 x 7

Weight
34 lbs

Warranty Information
2 year warranty