Tripp Lite series SMC10002URM Line-interactive UPS - Eaton SmartPro 120V 1kVA 700W Line Interactive Sine Wave UPS, 2U Rack/Tower, LCD, USB, DB9, 6 Outlets 2U Rack/Tower 6.40 Minute Stand by 120 V AC Input 120 V AC Output 6 x NEMA 5 15R

• Plug/Connector Type:
  NEMA 5-15P
  
• Receptacle Type:
  NEMA 5-15R
  
• Receptacle Detail:
  6 x NEMA 5-15R
  
• Cord Length:
  9.84 ft
  

• Load Capacity (VA):
  1000 VA
  
• Load Capacity (Watt):
  700 W
  
• Input Voltage:
  120 V AC
  
• Input Current:
  9.20 A
  
• Output Voltage:
  120 V AC
  
• Waveform Type:
  Sine Wave, Pure Sine Wave
  
• Surge Energy Rating:
  570 J
  
• Circuit Breaker:
  Yes
  

• Alarm:
  UPS StartUp, Power Failure, Low Battery, Overload, UPS Fault, Remote Shutdown
  

• Status Indicators:
  LEDs
  

• Serial Port:
  Yes
  
• USB:
  Yes
  

• Backup/Run Time (Full Load):
  6.40 Minute
  
• Backup/Run Time (Half Load):
  15.60 Minute
  
• Hot Swappable:
  Yes
  

• Maximum Operating Temperature:
  104°F (40°C)
  
• Sound Emission:
  45 dB
  
• Thermal Dissipation:
  35.75 W
  

• Height:
  3.45"
  
• Width:
  17.35"
  
• Depth:
  12.50"
  
• Rack Height:
  2U
  
• Form Factor:
  Rack/Tower
  
• Weight (Approximate):
  35.40 lb
  

• Country of Origin:
  China
  
• Environmental Compliance:
  Restriction of Hazardous Substances (RoHS)
  

OUTPUT
Output Volt Amp Capacity (VA):1000
Output kVA Capacity (kVA):1.0
Output Watt Capacity (Watts):700
Power Factor:0.7
Nominal Output Voltage(s) Supported:120V
Frequency Compatibility:60 Hz
Output Voltage Regulation (Line Mode):-21%, +8%
Output Voltage Regulation (Battery Mode):+/- 5%
Output Receptacles:(6) 5-15R
Output AC Waveform (AC Mode):Sine wave
Output AC Waveform (Battery Mode):Pure Sine wave
INPUT
Rated input current (Maximum Load):9.2A
Nominal Input Voltage(s) Supported:120V AC
UPS Input Connection Type:5-15P
Input Circuit Breakers:10A
UPS Input Cord Length (ft.):10
UPS Input Cord Length (m):3
Recommended Electrical Service:15A 120V
Input Phase:Single-Phase
BATTERY
Full Load Runtime (min.):6.4 min. (700w)
Half Load Runtime (min.):15.6 min. (350w)
DC System Voltage (VDC):24
Battery Recharge Rate (Included Batteries):Less than 4.5 hours from 10% to 90% (typical, full load discharge)
Internal UPS Replacement Battery Cartridge:RBC24V-LCD
Battery Access:Front panel battery access door
Battery Replacement Description:Hot-swappable, user replaceable batteries
Expandable Runtime:No
VOLTAGE REGULATION
Voltage Regulation Description:Automatic voltage regulation (AVR) maintains line power operation with an input voltage range of 83 to 147
Overvoltage Correction:Input voltages between 128 and 147 are reduced by 12%
Undervoltage Correction:Input voltages between 83 and 107 are boosted by 14%
USER INTERFACE, ALERTS and CONTROLS
Front Panel LCD Display:
Front panel LCD information and configuration screen offers detailed UPS and site power status and operating data, plus configuration of voltage, operating mode, alarm function and a variety of additional options (see manual for detailed LCD configuration and monitoring options)
Switches:
3 pushbutton switches control OFF / ON power status, MODE selection and MUTE / ENTER control functions
Alarm Cancel Operation:
Power-fail alarm can be temporarily silenced using alarm-cancel switch silent mode alarm configuration option available
Audible Alarm:
Audible alarm indicates UPS startup, power-failure, low-battery, overload, UPS fault and remote shutdown conditions
SURGE / NOISE SUPPRESSION
UPS AC Suppression Joule Rating:570
UPS AC Suppression Response Time:Instantaneous
EMI / RFI AC Noise Suppression:Yes
Included Mounting Accessory Description
Includes UPSHDEARKIT for 2 point front-mount and 2 point center-mount rackmount installation in 2 and 4 post racks, plus wallmount installation
Installation Form Factors Supported with Optional Accessories
4 post rackmount (4POSTRAILKIT) Tower (2-9USTAND) Wallmount (2POSTRMKITWM)
Primary Form Factor
Rackmount

Cooling Method
Fan

UPS Housing Material
Steel
COMMUNICATIONS
Communications Interface:DB9 Serial EPO (emergency power off) USB
Network Monitoring Port Description:Supports detailed monitoring of UPS and site power conditions
PowerAlert Software:Available via free download from www.tripplite.com
Communications Cable:USB cabling included
WatchDog Compatibility:
Supports Watchdog application, OS and hard-reboot restart options for remote applications
Network UPS Tools Compatibility:
NUT compatible. See the full list of Tripp Lite NUT compatible UPS systems at http://www.networkupstools.org/stable-hcl.htmlmanufacturerTripp Lite
LINE / BATTERY TRANSFER
Transfer Time:4 milliseconds (AC to battery), 1 milliseconds (Battery to AC)
Low Voltage Transfer to Battery Power (Setpoint):83
High Voltage Transfer to Battery Power (Setpoint):147
SPECIAL FEATURES
Grounding Lug:Back panel grounding lug
Cold Start (Startup in Battery Mode During a Power Failure):Cold-start operation supported
High Availability UPS Features:Hot swappable batteries
CERTIFICATIONS
UPS Certifications:Tested to UL1778 (USA) Tested to CSA (Canada) Tested to NOM (Mexico) Meets FCC Part 15 Category B (EMI)